Invogue seam belongs to the family of Standing Seam Profile Sheet
where the roof sheets are fixed to the structure without punching the sheets with the help of specially designed seam dips. Invogue seam roofing system provides longevity with very low maintenance cost & ensures adequate drainage from rain & solving water corrosion problems. The clips used in the system have movable features allows the panel to expand or contract with temperature & also resisting the wind uplift forces. The special clip seaming technique ensures leaks free roofs for many years.
Invogue standing seam metal roof panels are generally roll formed from PPGI or AZ150 bare or Colour coated coils which are interlocked with each other and placed vertically downwards from the ridge of the roof. Quite often point of the interlocking seams where the two panels join together is raised above the flat roof surface for easy water run-off and therefore eliminate the water ponding problems.
Standing Seam Profile Sheet
- Cover Width : 450mm
- Rib Height : 50mm
- Thickness : 0.55-0.58
is the most suitable profile for low as well as high slope roofs.
Also this S.S.System is recommended for large span buildings. Standing seam profile is roll formed on site in continuous lengths to eliminate any transit damage & leakages. Pre finished, the metal used by invogue roofing is known for its durability and longevity. The panel has good uplift ratings assuring the reliability of the roof.
Sealing standing seam roof panels by an electric remote controlled electric seaming machine is an effective way to ensure perfect weather tightness to roof. With this machine the edges of connecting panels can be bent together to form a water tight seal. This is most reliable roof available all over the world.
- Pay Mode Terms: T/T (Bank Transfer)